Bravo Pedicure Chair
Get your hands on The Bravo pedicure chair – a beautifully designed chair with a lot more to offer than your standard salon chair. On the surface is premium grade ultra-leather which doesn’t just look great but feels great too! The manicure trays can be folded away and are also acetone resistant, meaning that if there are any spillages, all it takes is a few minutes of cleaning up.
Enhancing the customer’s relaxation is the LED light that can be found below the basin. As they enjoy a foot massage from the pipeless magnetic jet system, the light will slowly fade through different colours.
Overall Dimensions: Bravo LE – 55.75”L (141.6 cm) x 45.5” W (116 cm) x 56” H (142 cm)
Bravo VE – 55.75”L (141.6 cm) x 45.5”W (116 cm) x 52”H (132 cm) – Refer to Installation Drawings for additional details.
Dimensions Seat to Floor: 24” (61 cm)
Suggested Minimum Distance from Back Edge of Spa Base to Back Wall: Bravo LE – 19” (48 cm) Bravo VE – 22” (56 cm)
Refer to Installation Drawings for additional details.
Shipping Dimensions Including Skid: 68” L (173 cm) x 34” W (86 cm) x 44” H (112 cm)
Shipping Weight Including Skid: Bravo LE – 315 lbs. (143 kg) / Bravo VE – 338 lbs. (153 kg)
Shipping Dimensions (Carton Size): 84.0” L (213 cm) x 40.0” W (102 cm) x 44” H (112 cm)
Net Weight: Bravo LE – 290 lbs. (132 kg) / Bravo VE – 313 lbs. (142 kg)
Client Weight Capacity: 350 lbs. (160 kg)
Basin Capacity: 4.75 US Gallons (18 liters)
Power Requirements: 120V AC, 15 Amp, 60HZ. A separate and dedicated 15 Amp GFCI circuit MUST be used for each pedicure chair.
Construction: Reinforced fiberglass with chemical resistant gel-coated finish.
Basin: Specially hardened and tempered glass, pre-plumbed.
Jet System: One (1) Dual Stream Magnetic Jet. Optional I-Fill®
system (automatically fills and shuts-off) is available.
Jet System: Two (2) standard NoPipe™ Dual Stream Magnetic Jets; I-Fill® System (automatically fills and shuts-off) is standard.
Incoming: Hot/Cold supply lines required (1/2” ID) solenoid controlled, built-in fill sensor. Connections located on back of spa base or as
Sprayer/Filler: Inline back-flow prevention is provided.
Discharge: Gravity drain or optional factory install drain pump. If factory installed drain pump is utilized, built-in back-flow prevention is
provided. Two drain pump sizes available: Standard = 8’Head, High Capacity (optional) = 16’Head
MASSAGE: Rolling and kneading massage, full-back, upper-back or lower-back.
CHAIR CONTROLS: Technician’s keypad: Seat Forward/Backward, Tilt and Exit. Electronically controlled, low voltage.
ARMCHAIR: Left Side: Seat Forward/Backward, Tilt and Exit. Electronically controlled, low voltage.
Right Side: Handheld Massage Control Wand.
Chair Release Lever: Manual operation, locks and unlocks chair to allow swivel.
Certification: Underwriters Laboratories Listed Compliance Listings to the following Standards: UL 1951, CAN/CSA C22.2 No. 68-92,
ANSI/ASME A112.18.3M, A112.19.7M, A112.18.1, CSA B125.1.2005
Compliant with IAPMO Plumbing Standards. Fixtures and hoses are UPC compliant.