All Categories
    Menu Close

    Continuum Echo LE Pedicure Chair

    Brand: Continuum
    Auto-fill system | LED spa lights
    • Neutral White
      Neutral White
    • Cherry
    • Espresso Pear
      Espresso Pear
    • Almond
    • Black
    • Burgundy
    • Chocolate
    • Cappuccino
    i h

    Echo LE Pedicure Chair

    The Echo pedicure chair is one of the most well-designed and customer-pleasing pedicure chairs that are currently on the market. The sleek modern design makes it perfect for any salon, regardless of your interior design, so that you don’t have to make a compromise.

    A pipeless magnetic jet system is in place to enhance the cleanliness of the chair’s basin while simultaneously making sure that your customers receive only the best treatment. One of the best features that this chair offers is the adjustable footrest, which allows customers to put their feet up and relax as well as making your salon workers’ jobs easier.


    Overall Dimensions: Echo LE – 62”L (158 cm) x 44” W (116 cm) x 55.5” H (141 cm)

    Dimensions Seat to Floor: 25” (63.5 cm)

    Suggested Minimum Distance from Back Edge of Spa Base to Back Wall: Echo LE – 11” (28 cm)

    Refer to Installation Drawings for additional details.

    Shipping Dimensions Including Skid: 68” L (173 cm) x 34” W (86 cm) x 44” H (112 cm)

    Net Weight: Echo LE – 235 lbs. (107 kg)

    Client Weight Capacity: 350 lbs. (160 kg)

    Basin Capacity: 4.75 US Gallons (18 liters)

    Power Requirements: 120V AC, 15 Amp, 60HZ. A separate and dedicated 15 Amp GFCI circuit MUST be used for each pedicure chair.

    Construction: Reinforced fiberglass with chemical resistant gel-coated finish.

    Basin: Specially hardened and tempered glass, pre-plumbed.

    Jet System: One (1) Dual Stream Magnetic Jet. Optional I-Fill®

    system (automatically fills and shuts-off) is available.

    Jet System: Two (2) standard NoPipe™ Dual Stream Magnetic Jets; I-Fill® System (automatically fills and shuts-off) is standard.


    Incoming: Hot/Cold supply lines required (1/2” ID) solenoid controlled, built-in fill sensor. Connections located on back of spa base or as

    specified otherwise.

    Sprayer/Filler: Inline back-flow prevention is provided.

    Discharge: Gravity drain or optional factory install drain pump. If factory installed drain pump is utilized, built-in back-flow prevention is

    provided. Two drain pump sizes available: Standard = 8’Head, High Capacity (optional) = 16’Head

    MASSAGE: Rolling and kneading massage, full-back, upper-back or lower-back.

    CHAIR CONTROLS: Technician’s keypad: Seat Forward/Backward, Tilt and Exit. Electronically controlled, low voltage.

    ARMCHAIR: Left Side: Seat Forward/Backward, Tilt and Exit. Electronically controlled, low voltage.

    Right Side: Handheld Massage Control Wand.

    Chair Release Lever: Manual operation, locks and unlocks chair to allow swivel.

    Certification: Underwriters Laboratories Listed Compliance Listings to the following Standards: UL 1951, CAN/CSA C22.2 No. 68-92,

    ANSI/ASME A112.18.3M, A112.19.7M, A112.18.1, CSA B125.1.2005

    Compliant with IAPMO Plumbing Standards. Fixtures and hoses are UPC compliant.

    Questions & Answers
    When you post a question, a notification email will be sent to our sales representatives, seller and customers who have previously purchased this product. This is a great opportunity to get feedback from other customers who have experience with this product. We reserve the right to remove questions/answers that are considered spammy, foul or violent language.