All Categories
    Menu Close

    Continuum Simplicity SE Pedicure Chair

    Brand: Continuum
    Auto-fill system | Acetone resistant wood base
    • Cherry
    • Removable Black Bowl
      Removable Black Bowl
    • Removable Cream Bowl
      Removable Cream Bowl
    • Almond
    • Black
    • Burgundy
    • Chocolate
    • Cappuccino
    i h

    Simplicity Pedicure Chair

    Give your salon a personality with the piece of art that is the Simplicity pedicure chair. As the name implies, this chair is fairly simple and yet it has so much to offer. Because of the leather chair cover and the wooden Formica finish, you won’t have to worry about any chemical-based products causing damage to the chair.

    Instead of having to deal with a stressful and expensive installation, the Simplicity pedicure chair only has to be plugged in before you’re ready to go! A few notable features are the massage and heat systems, the removable basin, and the adjustable footrest that benefits both the customer and your employees.


    Overall Dimensions: Simplicity SE – 57” L (145 cm) x 35.5” W (188 cm) x 54” H (137 cm)

    Dimensions Seat to Floor: 25” (63.5 cm)

    Suggested Minimum Distance from Back Edge of Spa Base to Back Wall: Echo LE – 11” (28 cm)

    Refer to Installation Drawings for additional details.

    Shipping Dimensions Including Skid: 68” L (173 cm) x 34” W (86 cm) x 44” H (112 cm)

    Net Weight: Simplicity SE – 220 lbs. (00 kg)

    Client Weight Capacity: 190 lbs. (86 kg)

    Basin Capacity: 1.5 US Gallons (5.7 liters) – Water level is three (3) inches deep

    Power Requirements: 120V AC, 15 Amp, 60HZ. A separate and dedicated 15 Amp GFCI circuit MUST be used for each pedicure chair.

    Construction: Reinforced fiberglass with chemical resistant gel-coated finish.

    Basin: Specially hardened and tempered glass, pre-plumbed.

    Jet System: One (1) Dual Stream Magnetic Jet. Optional I-Fill®

    system (automatically fills and shuts-off) is available.

    Jet System: Two (2) standard NoPipe™ Dual Stream Magnetic Jets; I-Fill® System (automatically fills and shuts-off) is standard.


    Incoming: Hot/Cold supply lines required (1/2” ID) solenoid controlled, built-in fill sensor. Connections located on back of spa base or as

    specified otherwise.

    Sprayer/Filler: Inline back-flow prevention is provided.

    Discharge: Gravity drain or optional factory install drain pump. If factory installed drain pump is utilized, built-in back-flow prevention is

    provided. Two drain pump sizes available: Standard = 8’Head, High Capacity (optional) = 16’Head

    MASSAGE: Rolling and kneading massage, full-back, upper-back or lower-back.

    CHAIR CONTROLS: Technician’s keypad: Seat Forward/Backward, Tilt and Exit. Electronically controlled, low voltage.

    ARMCHAIR: Left Side: Seat Forward/Backward, Tilt and Exit. Electronically controlled, low voltage.

    Right Side: Handheld Massage Control Wand.

    Chair Release Lever: Manual operation, locks and unlocks chair to allow swivel.

    Certification: Underwriters Laboratories Listed Compliance Listings to the following Standards: UL 1951, CAN/CSA C22.2 No. 68-92,

    ANSI/ASME A112.18.3M, A112.19.7M, A112.18.1, CSA B125.1.2005

    Compliant with IAPMO Plumbing Standards. Fixtures and hoses are UPC compliant.

    Questions & Answers
    When you post a question, a notification email will be sent to our sales representatives, seller and customers who have previously purchased this product. This is a great opportunity to get feedback from other customers who have experience with this product. We reserve the right to remove questions/answers that are considered spammy, foul or violent language.