" data-effect=fade data-slices=15 data-boxcols=8 data-boxrows=4 data-animspeed=500 data-pausetime=3000 data-directionnav=false data-controlnav=false data-controlnavthumbs=false data-pauseonhover=false data-prevtext="" data-nexttext="" data-mobilebreakpoint=767>
Vantage VE Pedicure Chair
Do you want to bring in more customers? Are you interested in offering a top-notch service? Of course you are, and that’s why the Vantage pedicure chair is what you’ve been looking for. On top of having a design that will blend in with any salon, there are various features that make this pedicure chair fantastic.
From the fibreglass basin that is easy to clean, stain-resistant, and strengthened to prevent damage, all the way to the massage system. It’s also worth noting that the chair is eco-friendly and so the water usage will be the bare minimal, helping to cut down any water bills!
Overall Dimensions: Vantage VE – 62” L (158 cm) x 45.5” W (116 cm) x 51.5” H (131 cm)
Dimensions Seat to Floor: 25” (63.5 cm)
Suggested Minimum Distance from Back Edge of Spa Base to Back Wall: Echo LE – 11” (28 cm)
Refer to Installation Drawings for additional details.
Shipping Dimensions Including Skid: 68” L (173 cm) x 34” W (86 cm) x 44” H (112 cm)
Net Weight: Vantage VE – 235 lbs. (107 kg)
Client Weight Capacity: 350 lbs. (160 kg)
Basin Capacity: 4.75 US Gallons (18 liters)
Power Requirements: 120V AC, 15 Amp, 60HZ. A separate and dedicated 15 Amp GFCI circuit MUST be used for each pedicure chair.
Construction: Reinforced fiberglass with chemical resistant gel-coated finish.
Basin: Specially hardened and tempered glass, pre-plumbed.
Jet System: One (1) Dual Stream Magnetic Jet. Optional I-Fill®
system (automatically fills and shuts-off) is available.
Jet System: Two (2) standard NoPipe™ Dual Stream Magnetic Jets; I-Fill® System (automatically fills and shuts-off) is standard.
Incoming: Hot/Cold supply lines required (1/2” ID) solenoid controlled, built-in fill sensor. Connections located on back of spa base or as
Sprayer/Filler: Inline back-flow prevention is provided.
Discharge: Gravity drain or optional factory install drain pump. If factory installed drain pump is utilized, built-in back-flow prevention is
provided. Two drain pump sizes available: Standard = 8’Head, High Capacity (optional) = 16’Head
MASSAGE: Rolling and kneading massage, full-back, upper-back or lower-back.
CHAIR CONTROLS: Technician’s keypad: Seat Forward/Backward, Tilt and Exit. Electronically controlled, low voltage.
ARMCHAIR: Left Side: Seat Forward/Backward, Tilt and Exit. Electronically controlled, low voltage.
Right Side: Handheld Massage Control Wand.
Chair Release Lever: Manual operation, locks and unlocks chair to allow swivel.
Certification: Underwriters Laboratories Listed Compliance Listings to the following Standards: UL 1951, CAN/CSA C22.2 No. 68-92,
ANSI/ASME A112.18.3M, A112.19.7M, A112.18.1, CSA B125.1.2005
Compliant with IAPMO Plumbing Standards. Fixtures and hoses are UPC compliant.